Welcome

Pure, Clean, Safe Water
UV & Filtration Systems

My Cart:

0 item(s) - NZ$0.00
You have no items in your shopping cart.

0

E sales@uvwatersystems.co.nz

T (64) 9 827 1409

More Views

WSR3 - 3 Filter Residential UV Water Filtration System with Bypass (no cover)

NZ$2,280.00

Quick Overview

All SS frame & ByPass - upmarket indoor system

Only 0 left

Availability: In stock

OR

Details

Download our WSR3 data sheet here

The R3 is designed to provide 'crystal clear bacteria free' drinking water to your whole house. Designed for untreated water sources that contain a normal level of leaf material, silts and mud (rain/tank; bore; stream/river).

How it Works

  • Rated 100 Lpm for your 'whole of house' - 2 bathrooms / 5+ occupants 
  • 3 stage filtration with food grade cartridges 5 micron pleated paper (floating organic material); 1 micron melt blown (finer silts/mud) and Carbon (taste/odor; pesticides)
  • 80 watt UV lamp to sterilize the reproductive organs of ALL FORMS of 'living nasties' (bacteria & viruses)
  • Can be mounted outside as the power supply has its own IP 55 waterproof enclosure provided the system is covered with a waterproof cover. 

 

Annual servicing is inexpensive with lamps and cartridge readily available online from us.

 

Simple as 1 2 3

  1. Hang on SS brackets (supplied) 
  2. Connect the inlet /outlet 
  3. Plug in 


Features

  • All components are screwed to a heavy duty SS frame - for easy dismantling. 
  • Cup end double welded internally polished chamber, with a sensor port for the option of adding a light sensor if required. 
  • Superior raised finned chamber bracket system - better heat dissipation and ease of gauge removal. 
  • Gel filled Digital '365 day countdown' ballast, factory mounted inside an IP rated box - to protect against moisture / RCM licensed. RCBO Trip Switch; Surge protection.
  • UVC 80 watt lamp output exceeds 30mJ/cm2 
  • Jumbo filter housings each with a glycerine filled pressure gauge that indicates the state or your pump and cartridges 
  • NSF 42 Cartridges: 3 x 10" Jumbo Filters; 5m pleated paper (debris); 1m Meltblown (silts/mud); Carbon (taste/odor, sprays) 
  • 1" Piping Unions: rubber washer sealing (no thread tape) for ' inlet to filter' 'filter to UV chamber' 'Uv chamber to outlet ball valve – reduces leaks. 
  • HiFlo Piping: SS pipe fittings; 1.0" BSP valves & Union connections (F); 


Options

  1. Cover Option: Corner reinforced and riveted white aluminium Weatherproof ACM (alloy composite material) security cover. 
  2. AutoShut Option: Actuated 1.0” Ball Valve, controlled by ballast auxiliary; Normally Open; Closes on lamp fault. 
  3. Light Sensor Option. Monitors UV output. Shipping & Installation Carton: 1.1 x 0.6 x0.3 (0.2 m3); 35kg 


Shipping & Installation

  • Dimensions: 35kg; 1040x530x230; Allow 900mm on left side to remove lamp when servicing 
  • Mount facing south, and if possible out of direct midday sun 
  • Do not mount close to ground. Eye level for top of system makes for easier servicing 
  • Run inlet and outlet pipes horizontally then up to the ball valves (to allow flexibility for ease of connection and disconnection if required) 


Maintenance 

  • Check cartridge periodically to determine typical interval for plugging. If this period is less than 6 months investigate water source for preventable contamination or fit pre-filtration such as a RainCatcher. 
  • When ballast alarms, replace UV lamp & remove and clean quartz sleeve, replace seals (digital display reads A3 - lamp life of 365 days USAGE has been fully used up. Note do not reuse the lamp even though it will be still glowing, as its output will continue to drop and be lower than needed for the systems rated flowrate. 


Should you get sick

  1. Check your cartridges to make sure that no water is bypassing with debris that allows 'shadowing'
  2. Remove & check the sleeve for clarity; clean or replace
  3. Replace the lamp or get a more powerful lamp
  4. Reduce your peak water consumption


Water Quality

Designed to meet or exceed the US and NZ Drinking Water Standard that requires that water passed through the system must fall within the following parameters:

  • Iron: < 0.3 ppm (0.3mg/L) 
  • Hardness* : < 7 gpg (120 mg/L) 
  • Turbidity: < 1NTU 
  • Manganese: < 0.05 ppm (0.05 mg/L) 
  • Tannins: < 0.1 ppm (0.3 mg/L) 
  • UV Transmittance: > 75% (call factory for recommendations on applications where UVT < 75%)

Additional Information

SKU WSR3