WSB4 - 4 Filter Commercial UV Water System (see options)

Download our WSB4 data sheet here

The B4 is designed for

• crystal clear, bacteria free water
• water treatment at 175 Litres/Min @ a dosage that exceeds 40mJ/cm²
• filtering typical water sources that may contain sprays, debri, or have taste/odor issues.
• NOTE water that has unusually high amounts of organic debris or dissolved rocks will require prefiltration

Filtration

• Fitted with 4 food grade 20" Jumbo filter cartridges
• Untreated water cartridge set, flow rate exceeds 150 Lpm
• 20 Micron Pleated Paper - removes larger organic debris
• 5 Micron Pleated Paper - removes typical debris found in 'clean tanks'
• 1 Micron Melt Blown Poly - removes mud that would otherwise quickly make a carbon cartridge ineffective 
• 5 Micron Carbon - for improvement of taste & odor & removal of chlorine
• All filter heads fitted with glycerine filled gauges (indicate cartridge plugging)

Bolt to the wall, connect the inlet /outlet and plug in simplicity

Major features include:

Water Flow

• ALL water passages sized for flow rates well in excess of UV sterilisation capability
• SS 1.5" tube fittings for high flow commercial applications
• 1.5" inlet / outlet 20" Jumbo filter housings
• All joins sealed with orings or rubber gaskets (thread tape/sealants not used) no more pesky leaks

Safety

• Pressure gauges on each filter head (oring sealed) for ease of replacement if required
• Chamber 1/2" port (for fitting a UV sensor)

• Extended length chamber
• Superior 'raised fin' chamber bracket system
• Unrestricted air flow around UV chamber