Magento Commerce

Welcome

Pure, Clean, Safe Water
UV & Filtration Systems

My Cart:

My Cart 0

E sales@uvwatersystems.co.nz

T (64) 9 827 1409

 

WSR4M10N - 4 Filter Mains Water Filtration System (with cover) NSF 42

WSR4M10N - 4 Filter Mains Water Filtration System (with cover) NSF 42

SKU
WSR4M10N
NZ$3,910.00 NZ$3,400.00
WSR4M10N - 4 Filter Mains Water Filtration System (with cover) NSF 42 is available to buy in increments of 1
NSF 42 Certified for removal of Chlorine from 490,000 liters

Download our WSR4M10N datasheet here

This NSF 42 Certified filtration system is designed for

  • supply pressures up to commercial ring main pressures of 125 psiG
  • water usage volume equivalent to that of a residence
  • removing Chlorine from treated drinking water supplies
  • examples: food & beverage production, small schools, small campgrounds, Marae's, small shopping centres
 

Certification

  • NSF 42: Chlorine Reduction; 490,000 litres @ 50 Lpm
 

Filtration

  • 4 x 10" Jumbo filter cartridges
  • Cartridges: Melt Blown then 3 x Carbon
  • All filter heads fitted with glycerine filled gauges to indicate 'plugging'
  • Performance: 1st sumps 1 micron meltblown protects the following Carbon cartridges granules from becoming coated with suspended solids (silt / mud). 2nd sumps carbon then removes a significant amount of the chlorine, with 3rd & 4th sumps carbon cartridges removing the 'remainder' of chlorine. Residual Chlorine at 490,000 liters still an amazingly low 0.5 mg/L, a reduction from the test loading of 2.0 mg/L. The NSF Pass concentration must be 1.0 mg/L or lower.

 

Hang on its 3 x SS brackets, connect the inlet /outlet

 

Major features include:

Components

  • ALL stainless steel Jumbo 10" Filter heads & housings NSF Tested to 300 psiG for structural integrity
  • ALL stainless steel mounting frame
  • Flow Control Valve set to 58 Lpm
  • SS 1.0" Unions & tube fittings to maintain this full flow
  • 1.0" inlet / outlet 
  • 10" Jumbo filter housings
  • All joins sealed with Orings or rubber gaskets (thread tape/sealants not used) no more pesky leaks  ;
  • Pressure gauges on each filter head (Oring sealed for ease of replacement if required)

 

System Cover

  • Supplied with: Weatherproof ACM (alloy composite material) security cover

 

Shipping & Installation

  • System Shipping Carton: 1.1 x 0.6 x 0.3 (0.2 m3); 40kg
  • System Dimensions: 1035 wide x 550 high x 235 deep
  • Typical Installation • Wall mounted with at least 100 mm ground clearance to allow for removal of sumps / cartridges
  • Run inlet and outlet pipes horizontally under the system then up to the 1.0" ball valves.

 

Maintenance

  • Replace filter cartridges annually - this reduces the risk of bacteria build up in the cartridges which could flow through to consumption, if there is no UV protection after this systems filtration

More Information

SKU WSR4M10N
Write Your Own Review
You're reviewing:WSR4M10N - 4 Filter Mains Water Filtration System (with cover) NSF 42