WSR4M20P - 4 Filter High Flow Mains Water Filtration System (with cover)
Whole of building chlorine removal
The M4/20 is for the filtration of Mains/City Water to remove Chlorine, NSF tested residual Chlorine concentration reduced from 2.0 mg/L to 0.12 mg/L at 1,000,000 Litres.
UV: Not required IF the ‘City Water’ has already been disinfected / sterilized.
Filtration: Four 20" Jumbo Filters; flow rate tested to exceed 150 Lpm
Cartridges: 1M poly + 3 x 5M KX carbons
Performance: Poly 1 micron protects the KX Carbon granules from being coated with suspended solids (silt / mud).
Piping: SS pipe fittings; 1.0" BSP valving & connections (F);
Mounting: SS Frame
Supplied with: Molded security cover;
Shipping Carton: 1.1 x 0.8 x0.3 (0.2 m3); 30kg
Dimensions: 1035x535x235
Typical Usage • ‘Whole of Building’ supply for city properties supplied with chlorinated ‘City Water’.
Installation Guide:
Mount in the basement or externally on the southern side of the building. 2 x SS hanging brackets supplied.
Run inlet and outlet pipes horizontally under the system, then up to the 1" ball valves
Maintenance • Replace filter cartridges annually (to prevent possible build up of bacteria in the cartridges) as there is no UV protection.
SKU | WSR4M20P |
---|